Shanta Engineering
Thane West, Thane, Maharashtra
GST No. 27AAXFS9600F1ZP
TrustSEAL Verified
Call 08048970239100% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Unit |
| Brand | Shanta Engineering |
| Control | PLC Based |
| Finishing | Powder coated |
| Material | Ms,ss |
| Plastic temperature rise rate | 2 + 0.20 deg cel / per min |
| Rate of rise of temperature | 50 + 50 deg cel / per hr - 120 + 120 deg cel |
Vicat Softening Temp. (ASTM D1525)performs determination of the temperature at which a standard indenter penetrates 1mm into the surface of a plastics test specimen under one of the loads specified under a uniform rate of heating.
Deflection Temperature of Plastic Under Flexural Load (As per ASTM D-648) performs determination of temp. at which an arbitrary deformation occurs when plastics are subjected to arbitrary bending loads and conditions of continually rising temperature.
Also available VST/HDT apparatus PLC BASED. As per ASTM D 1525 & ASTM D 648. Values of VST & HDT obtained through software. Graphic display & print out through PC, penetration/ Deflection Vs Temp graph & values of VST & HDT could be obtained by attaching a printer to the PC
&
VST/HDT APPARATUS AS PER ASTM D 1525 AND ASTM D 648 COMPUTERISED, LINEAR ENCODER SYSTEM
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Usage/Application | determination of susceptibility of ethylene plastics |
| Brand | Shanta Engineering |
| Bath Material Inner | SS |
| Bath Material Outer | MS |
| Max. Temperature | 500 deg cel |
| Resolution | 0.100 deg cel |
| Accessories | Unit |
| 1 Blanking dle | 1No. |
| 2 Nicking jig | 1No. |
| 3 Bending cum transferring device | 1No. |
| 4 Specimen holder | 10Nos. |
| 5 Test Tubes | 10Nos. |
| 6 Corks | 10Nos. |
Product Details:
| Minimum Order Quantity | 1 Unit |
| Usage/Application | Industrial |
| Brand | Shanta Engineering |
| Max Temperature | Upto 350 deg cel |
| Cylindrical Block Material | Aluminium |
| Finishing | Powder Coated |
| Nobes | 2 |
Melting Point Apparatus is fabricated using best grade raw materials. These are widely used in various industries and acknowledged for the dimensional accuracy and longer services. Melting Point Apparatus is used in estimating the melting point of chemicals, Pharmaceuticals, and Foods. This is extremely helpful to resolve the melting point of any essence. In this, the temperature is controlled by the power controller.
Features:
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| A.C. Drive Speed | 5 mm / min. to 100 mm / min. OR 30 mm / min. to 500 mm / min. |
| A.C. Servo Drive Speed | 1 mm / min. to 500 mm / min. |
| Displacement Resolution | 0.2 mm |
| Speed Range | 0.01 mm/min to 1000 mm/min |
| Touch Pad HMI | 7 inch |
| Load counts | 20,000 |
| Reading Speed | 10 milliseconds |
We offer an extensive range of Electronic Tensile Testing Machine. These are manufactured with quality raw materials in accordance with the specifications given by the client. Our range is well known for easy installation and performance. These machines are used to perform tests on various materials like rubber, plastics, leather etc. We export these machines at competitive prices. It gives speed accuracy of ± 1.%
Following changes can be offered on specific inquires:
Details:
Model No. | SET-T-1000 N | SET-T- 5000 N | SET-T10 KN | SET - T 20 KN | SET - T 50 KN |
Max. Capacity (Kn) | 1 | 5 | 10 | 20 | 50 |
Load Resolution (N) | 0.1 | 0.5 | 1.0 | 2.0 | 5.0 |
Max. Cross-head displacement without grips / fixture (mm) | 900 | 900 | 800 | 700 | 700 |
Displacement Res. (mm) | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 |
Column Clearance (mm) | 450 | 450 | 450 | 450 | 450 |
Test Speeds (mm/min) | 50,100,250,500 | 50,100,250,500 | 30,50,100 | 30,50,100 | 30,50,100 |
Machine Dimensions mm (W x d x H) | 900 x 600 x 2000 | 900 x 600 x 2000 | 900 x 600 x 2000 | 900 x 600 x 2000 | 900 x 600 x 2000 |
Power Requirement | 0.3 KVA | 0.5 KVA | 0.1 KVA | 2.0 KVA | 2.5 KVA |
Power supply | 415 + /- 10%, 3 - Phase, 50Hz with Neutral & Earth | ||||
Advantage:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Displacement Resolution | 0.1 mm |
| Load Counts | 20000 |
| No. of Columns | 2 |
| Reading Speed | 10 milliseconds |
| Speed Accuracy | +1% or -1% |
| Speed Range | 0.1 mm / min to 500 mm / min |
| Touch Pad HMC Size | 7 inch |
| MODEL NO. | SET-T 5000 N | SET-T 10 KN | SET-T 20 KN | SET-T 30 KN |
| Max. capacity(Kg) | 500 | 1000 | 2000 | 3000 |
| Load Resolution(N) 1:10,000 | 0.5 | 1 | 2 | 2 |
| Max. crosshead displacement without grips/fixtures (mm) | 900 | 900 | 900 | 900 |
| Diisplacement resolution (mm) | 0.2 | 0.2 | 0.2 | 0.2 |
| Column clearance(mm) | 380 | 380 | 450 | 450 |
| Variable speed with the help of A.C.Drive | 5mm/min to 100mm/min or 30mm/min to 500mm/min | |||
| Variable speed with the help of A.C.Servo Drive | 1mm/min to 500mm/min | |||
| Machine Dimensions w x d x h in (mm ) | 1100 x 330 x 1800 | 1100 x 330 x 1800 | 1100 x 400 x 1800 | 1100 x 400 x 1800 |
| Power requirement for A.C. Drive | 0.5 HP | 1.0 HP | 2.0 HP | 2.0 HP |
| Power requirement for A.C. Servo Drive | 400W | 600W | 1.0KW | 1.0KW |
| Power Supply | 230 VAC±10%, Single Phase, 50Hz with Neutral & Earth | |||
Product Details:
| Grade | Manual |
| Material | MS,SS |
| Finishing | Powder Coated |
| Max. Available energy | 21.68 J |
| Voltage Supply | 110 V / 220 V |
| Standard | ASTM D-256 |
Izod Impact Tester is manufactured as per ASTM D-256. The method of determining impact strength of rigid plastics or reinforced plastics. A notched sample is generally used to determine impact strength. The test determines the amount of energy absorbed by a material during factual.
Features:
Additional Information:
Additional Information:
Additional Information:
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Brand | Shanta Engineering |
| Usage | used to grip flat strips or round bars of metals |
| Finishing | Powder Coated |
| Material | MS, SS |
| No. of Handles | 1 |
| Nobe Material | Bakelite |
Self Locking Wedge Grips is usually used to grip flat strips or round bars of metals or rigid material. The grips are available as per the capacity of UTM. The grip holds the specimen more rigidly as the load on specimen increases.
Features:
5/5
Reviewed by 3 Users
Most Relevant Reviews